This repository contains a KiCAD Symbol, Footprint, and 3D model for the Radxa CM5 compute module.
The KiCAD symbol consists of three units which map to the CM5 Schematic as follows:
- Unit-A is schematic reference U13-A
- Unit-B is schematic reference U13-B
- Unit-C is schematic reference J1
Note: Due to the limitation of how KiCAD maps pin numbers between Symbol and Footprint, Unit-C is numbered from 201 to 300. To match schematic reference J1's pinout subtract 200, eg: Unit-C Pin 217 is J1's Pin 17.
The footprint has been mechanically validated for correct fit with CM5 module.
When ordering SMD stencil get 0.10mm thickness.
- Hirose DF40C-100DS-0.4V(51) connector
- Radxa CM5 Schematic - Page 4
- Radxa CM5 IO Board Schematic - Page 17