-
Notifications
You must be signed in to change notification settings - Fork 67
Sensors
Here is a lists sensors that can be used with Juggluco. All sensors can be configured in the phone version of Juggluco to directly connect with a Wear OS watch, so you can receive glucose values on your watch, while leaving your phone home.
The first Freestyle Libre sensor that can only be scanned via NFC. Juggluco can scan and activate these sensors. They are only partly supported. The values can be displayed, saved and send to Libreview, but for statistics screen in Juggluco the values received via Bluetooth are used. The web server can also be used to receive the scans and history values, but they are not send by the glucose broadcasts or used for Nightscout.
The 14 days US Freestyle Libre sensor can be used with Juggluco.
To use it, scan the sensor.
There are different variants of Freestyle Libre 2 sensors. All of them are fully supported by Juggluco. They can be activated, scanned and the glucose values can be received via Bluetooth.
Scan the sensor via NFC to use it. You need to force stop the app previously used with sensor and turn off Freestyle reader.
Also fully supported. Both the European and the USA variant.
If you want to take over a sensor from Abbott's Libre 3 app or be able to return the connection of the sensor to Abbott's app, you need to enter your Libreview account information in Left menu→Settings→Exchange data→ Libreview and press "Get Account ID"→From Libreview. If you only want to use a sensor with Juggluco, you can enter an arbitrary number under "Get Account ID". Hereafter you need to scan the Libre 3 sensor. You can only effectively scan a Libre 3 sensor when it was activated with the same Libreview account ID as when it is later scanned.
You always need to make sure that the app previously used with the sensor isn't running.
There exists different types of Sibionics sensors and only one works with Juggluco. The information leaflet calls it GS1Sb. This site shows the same package:
https://zhongce.sina.com.cn/iframe/article/view/175921/
To use a sensor, press in Juggluco left menu→Photo and scan the data matrix on the package.
Force close the app previously used with the sensor.
Works with Dexcom G7.
You can return back to the original app by terminating the sensor in Juggluco (left menu→Sensor→Terminate) and starting the other app (and entering the pin code).
To use a Dexcom G7 with Juggluco, you scan the data matrix on the applicator with left menu→Photo. Put other used Dexcom sensors out of Bluetooth reach and turn off apps and devices that were previously connected with the sensor or turn off Bluetooth of the previous device.
You have to agree to pair the sensor and if you are too late you have to wait another 5 minutes. So keep the display on.
If you want to directly connect the sensor with a WearOS watch, you can also turn on left menu→Watch→WearOS config→Direct sensor-watch connection, before scanning the applicator data matrix. Switching between devices is difficult for this sensor.
With Dexcom ONE+ it works exactly the same way as with Dexcom G7.