***** NO LONGER MAINTAINED *****

This card is no longer being maintained as I simply don't have time. I will leave it here, but I will not be fixing and bugs or providing any enhancements.

Weather Radar Card

A Home Assistant rain radar card using the tiled images from RainViewer

Support

Hey dude! Help me out for a couple of 🍻 or a ☕!

Description

This card uses map tiles of radar data provided by RainViewer. This allows for one continous map that can be zoomed and panned seamlessly. This card allows this to be displayed within Home Assistant. The card allows you create radar loops of up to at least 24 hours.

Options

All of the options below can be selected using the GUI config editor, there is no need to edit the yaml config directly.

Name	Type	Requirement	Description	Default
type	string	Required		must be 'custom:weather-radar-card'
card_title	string	Optional	The title to display on the card	no title displayed
data_source	string	Optional	Specifies whcih set of radar tiles to use	'RainViewer-Original' see section below for valid values
map_style	string	Optional	Specifies the style for the map	'light' see section below for valid values
zoom_level	number	Optional	The initial zoom level, can be from 4 to 10	7
center_latitude	number	Optional	The initial center latitude of the map	the location of your HA instance
center_longitude	number	Optional	The initial center longitude of the map	the location of your HA instance
marker_latitude	number	Optional	The latitude for the home icon if enabled	the same as center_latitude
marker_longitude	number	Optional	The longitude for the home icon if enabled	the same as center_longitude
frame_count	number	Optional	The number of frames to use in the loop	10
frame_delay	number	Optional	The number of milliseconds to show each frame	500
restart_delay	number	Optional	The additional number of milliseconds to show the last frame	1000
static_map	boolean	Optional	Set to true to disable all panning and zooming	false
show_zoom	boolean	Optional	Show the zoom controls in the top left corner	false
square_map	boolean	Optional	Will keep the map square (not in panel mode)	false
show_marker	boolean	Optional	Show the home icon at the marker position	false
show_playback	boolean	Optional	Show the playback controls in the bottom right toolbar	false
show_recenter	boolean	Optional	Show the re-center control in the bottom right toolbar	false
show_scale	boolean	Optional	Show a scale in the bottom left corner	false
show_range	boolean	Optional	Show range rings around marker position	false
extra_labels	boolean	Optional	Show more town labels (labels become smaller)	false

Data Source

The RainViewer tiles are updated every 5 minutes with a lag of just one minute (ie. the most recent image is between 1 and 6 minutes old). The valid values for this field are:

• RainViewer-Original
• RainViewer-UniversalBlue
• RainViewer-TITAN
• RainViewer-TWC
• RainViewer-Meteored
• RainViewer-NEXRAD
• RainViewer-Rainbow
• RainViewer-DarkSky

Map style

Specifies the style of map to use. Valid values are:

• light
• dark
• voyager
• satellite

These are based off the Carto and ESRI map styles that are available.

Samples

This is the configuration used to generate the radar loop on this page.

type: 'custom:weather-radar-card'
frame_count: 10
center_latitude: -25.567607
center_longitude: 152.930597
marker_latitude: -26.175328
marker_longitude: 152.653189
show_marker: true
show_range: true
show_zoom: true
show_recenter: true
show_playback: true
zoom_level: 8

This will display a radar for the whole of Australia showing the previous 24 hours of radar images with a 100mSec delay between frames.

type: 'custom:weather-radar-card'
frame_count: 144
frame_delay: 100
marker_latitude: -33.857058
marker_longitude: 151.215179
show_marker: true
show_range: false

Install

If you use HACS, the card is now part of the default HACS store.

If you don't use HACS (seriously you should as it makes life so much easier), you can download the required files from latest releases. Drop all of the files in www/community/weather-radar-card folder in your config directory. It should look like this:

    └── ...
    └── configuration.yaml
    └── www
        └── community
            └── weather-radar-card
                └── weather-radar-card.js
                └── home-circle-dark.svg
                └── home-circle-light.svg
                └── leaflet.css
                └── leaflet.js
                └── leaflet.toolbar.min.css
                └── leaflet.toolbar.min.js
                └── pause.png
                └── play.png
                └── radar-colour-bar-darksky.png
                └── radar-colour-bar-meteored.png
                └── radar-colour-bar-nexrad.png
                └── radar-colour-bar-original.png
                └── radar-colour-bar-rainbow.png
                └── radar-colour-bar-titan.png
                └── radar-colour-bar-twc.png
                └── radar-colour-bar-universalblue.png
                └── recenter.png
                └── skip-back.png
                └── skip-next.png

Next add the following entry in lovelace configuration:

resources:
  - url: /local/community/weather-radar-card/weather-radar-card.js
    type: module