Skip to content

Latest commit

 

History

History

ESPHome

README.md

ESPHome examples

These examples shows the yaml code to get the ESP32-2432S028R display to work in ESPHome.

In order for the yaml to work you need to add the following settings in your secrets.yaml file:

  • api_key
  • ota_password
  • wifi_ssid
  • wifi_password
  • ap_password

For some of the examples you need to copy font or image files to your ESPHome folder. Those examples contains the instructions in the yaml file itself.

Note

NEW HARDWARE VERSION WITH USB-C CONNECTOR:

for this, the display component needs to be set up like the following (model ili9342, no rotation, inverted)

display:
 - platform: ili9xxx
   id: esp_display
   model: ili9342
   spi_id: tft
   cs_pin: GPIO15
   dc_pin: GPIO2
   #invert_display: true (changed to below with ESPhome 2023.12.0)
   invert_colors: true

1-HelloWorld

This yaml displays the text Hello World centered in the display.

2-ESPHomeClock

This yaml displays the ESPHome logo and the current date and time.

3-RGBLED

This yaml publishes the RGB LED on the back of the display to Home Assistant.

4-TouchDemo

This yaml displays two rectangles acting as binary touch sensors inside of Home Assistant.

5-TemperatureGraph

This yaml displays a graph of a Home Assistant temperature sensor.

6-VariousFeatures

Example for ESPHome for board with 2 USB ports using most of the features of the board (also works on single USB port boards)

7-ExtendedTouchDemo

Extend the ESPHome touch demo to add:

  • Icons from the Material Design Icons font
  • A Wifi signal icon in the top right
  • Sleep mode that turns off the backlight
  • The LED on the back of the board