PlanB is a HTTP and websocket proxy backed by Redis and inspired by Hipache.
It aims to be fully compatible with Hipache when Redis is used as a backend. The same format is used for all keys stored in Redis so migrating from Hipache to PlanB should be completely seamless. The process should be as simple as replacing Hipache's executable for PlanB.
The following flags are available for configuring PlanB on start-up:
--listen value, -l value: Address to listen (default: "0.0.0.0:8989")--tls-listen value: Address to listen with tls--tls-preset value: Preset containing supported TLS versions and cyphers, according to https://wiki.mozilla.org/Security/Server_Side_TLS. Possible values are [modern, intermediate, old] (default: "modern")--metrics-address value: Address to expose prometheus /metrics--load-certificates-from value: Path where certificate will found. If value equals 'redis' certificate will be loaded from redis service. (default: "redis")--read-redis-network value: Redis address network, possible values are "tcp" for tcp connection and "unix" for connecting using unix sockets (default: "tcp")--read-redis-host value: Redis host address for tcp connections or socket path for unix sockets (default: "127.0.0.1")--read-redis-port value: Redis port (default: 6379)--read-redis-sentinel-addrs value: Comma separated list of redis sentinel addresses--read-redis-sentinel-name value: Redis sentinel name--read-redis-password value: Redis password--read-redis-db value: Redis database number (default: 0)--write-redis-network value: Redis address network, possible values are "tcp" for tcp connection and "unix" for connecting using unix sockets (default: "tcp")--write-redis-host value: Redis host address for tcp connections or socket path for unix sockets (default: "127.0.0.1")--write-redis-port value: Redis port (default: 6379)--write-redis-sentinel-addrs value: Comma separated list of redis sentinel addresses--write-redis-sentinel-name value: Redis sentinel name--write-redis-password value: Redis password--write-redis-db value: Redis database number (default: 0)--access-log value: File path where access log will be written. If value equals 'syslog' log will be sent to local syslog. The value 'none' can be used to disable access logs. (default: "./access.log")--request-timeout value: Total backend request timeout in seconds (default: 30)--dial-timeout value: Dial backend request timeout in seconds (default: 10)--client-read-timeout value: Maximum duration for reading the entire request, including the body (default: 0s)--client-read-header-timeout value: Amount of time allowed to read request headers (default: 0s)--client-write-timeout value: Maximum duration before timing out writes of the response (default: 0s)--client-idle-timeout value: Maximum amount of time to wait for the next request when keep-alives are enabled (default: 0s)--dead-backend-time value: Time in seconds a backend will remain disabled after a network failure (default: 30)--flush-interval value: Time in milliseconds to flush the proxied request (default: 10)--request-id-header value: Header to enable message tracking--active-healthcheck: Enable active healthcheck on dead backends once they are marked as dead. Enabling this flag will result in dead backends only being enabled again once the active healthcheck routine is able to reach them.--engine value: Reverse proxy engine, options are 'native', 'sni' and 'fasthttp'. Using 'sni' and 'fasthttp' is highly experimental and not recommended for production environments. (default: "native")--backend-cache: Enable caching backend results for 2 seconds. This may cause temporary inconsistencies.--help, -h: show help--version, -v: print the version
The --read-redis-* flags refer to the Redis server used for read-only
operations (reading the backends for each frontend).
The --write-redis-* flags refer to the Redis server used for write operations
(marking and publishing dead backends).
Separating the read and write servers is not mandatory but is useful for
improving performance. A common scenario is having a slave Redis server on
localhost configured as --read-redis and a remote Redis master configured as
--write-redis.
- Load-Balancing
- Dead Backend Detection
- Dynamic Configuration
- WebSocket
- TLS
The easiest way to install PlanB is to pull the trusted build from the hub.docker.com and launch it in the container:
# run Redis
docker run -d -p 6379:6379 redis
# run PlanB
docker run -d --net=host tsuru/planb:v1 --listen ":80"
The configuration is managed by Redis that makes possible to update the configuration dynamically and gracefully while the server is running, and have that state shared across workers and even across instances.
Let's take an example to proxify requests to 2 backends for the hostname
www.tsuru.io. The 2 backends IP are 192.168.0.42 and 192.168.0.43 and
they serve the HTTP traffic on the port 80.
redis-cli is the standard client tool to talk to Redis from the terminal.
Follow these steps:
$ redis-cli rpush frontend:www.tsuru.io mywebsite
(integer) 1
The frontend identifer is mywebsite, it could be anything.
$ redis-cli rpush frontend:www.tsuru.io http://192.168.0.42:80
(integer) 2
$ redis-cli rpush frontend:www.tsuru.io http://192.168.0.43:80
(integer) 3
$ redis-cli lrange frontend:www.tsuru.io 0 -1
1) "mywebsite"
2) "http://192.168.0.42:80"
3) "http://192.168.0.43:80"
$ redis-cli -x hmset tls:www.tsuru.io certificate < server.crt
$ redis-cli -x hmset tls:www.tsuru.io key < server.key
$ redis-cli -x hmset tls:*.tsuru.com certificate < wildcard.crt
$ redis-cli -x hmset tls:*.tsuru.io key < wildcard.key
create directory following this structure
cd certficates
ls
*.domain-wildcard.com.key
*.domain-wildcard.com.crt
absolute-domain.key
absolute-domain.crt
While the server is running, any of these steps can be re-run without messing up with the traffic.
One way to debug/toubleshoot planb is by analyzing the running goroutines.
Planb is able to handle the USR1 signal to dump goroutines in its execution screen:
$ kill -s USR1 <planb-PID>
- Repository & Issue Tracker: https://github.com/tsuru/planb
- Talk to us on Gitter: https://gitter.im/tsuru/tsuru