% crio(8) Open Container Initiative Daemon % Dan Walsh % SEPTEMBER 2016
crio - OCI Kubernetes Container Runtime daemon
crio
[--additional-devices=[value]]
[--apparmor-profile=[value]]
[--bind-mount-prefix=[value]]
[--cgroup-manager=[value]]
[--cni-config-dir=[value]]
[--cni-plugin-dir=[value]]
[--config=[value]]
[--conmon=[value]]
[--cpu-profile=[value]]
[--default-capabilities=[value]]
[--default-mounts=[value]]
[--default-transport=[value]]
[--default-runtime=[value]]
[--default-sysctls=[value]]
[--default-ulimits=[value]]
[--default-transport=[value]]
[--enable-metrics]
[--file-locking]
[--gid-mappings=[value]]
[--help|-h]
[--hooks-dir=[value]]
[--insecure-registry=[value]]
[--listen=[value]]
[--log=[value]]
[--log-format value]
[--log-level value]
[--log-dir value]
[--log-journald]
[--metrics-port value]
[--pause-command=[value]]
[--pause-image=[value]]
[--pause-image-auth-file=[value]]
[--pids-limit=[value]]
[--profile=[value]]
[--profile-port=[value]]
[--read-only]
[--registry=[value]]
[--root=[value]]
[--runroot=[value]]
[--runtime=[value]]
[--seccomp-profile=[value]]
[--selinux]
[--signature-policy=[value]]
[--storage-driver=[value]]
[--storage-opt=[value]]
[--stream-address=[value]]
[--stream-port=[value]]
[--uid-mappings=[value]]
[--version|-v]OCI-based implementation of Kubernetes Container Runtime Interface Daemon
crio is meant to provide an integration path between OCI conformant runtimes and the kubelet. Specifically, it implements the Kubelet Container Runtime Interface (CRI) using OCI conformant runtimes. The scope of crio is tied to the scope of the CRI.
- Support multiple image formats including the existing Docker image format.
- Support for multiple means to download images including trust & image verification.
- Container image management (managing image layers, overlay filesystems, etc).
- Container process lifecycle management.
- Monitoring and logging required to satisfy the CRI.
- Resource isolation as required by the CRI.
Usage:
crio [GLOBAL OPTIONS]
crio [GLOBAL OPTIONS] config [OPTIONS]--additional-devices="": devices to add to the containers
--apparmor-profile="": Name of the apparmor profile to be used as the runtime's default (default: "crio-default")
--bind-mount-prefix="": A prefix to use for the source of the bind mounts. This option would be useful if you were running CRI-O in a container. And had / mounted on /host in your container. Then if you ran CRI-O with the --bind-mount-prefix=/host option, CRI-O would add /host to any bind mounts it is handed over CRI. If Kubernetes asked to have /var/lib/foobar bind mounted into the container, then CRI-O would bind mount /host/var/lib/foobar. Since CRI-O itself is running in a container with / or the host mounted on /host, the container would end up with /var/lib/foobar from the host mounted in the container rather then /var/lib/foobar from the CRI-O container.
--cgroup-manager="": cgroup manager (cgroupfs or systemd)
--cni-config-dir="": CNI configuration files directory (default: "/etc/cni/net.d/")
--cni-plugin-dir="": CNI plugin binaries directory (default: "/opt/cni/bin/")
--config="": path to configuration file
--conmon="": path to the conmon executable (default: "/usr/local/libexec/crio/conmon")
--cpu-profile="": set the CPU profile file path
--default-capabilities="": capabilities to add to the containers (default: "CHOWN, DAC_OVERRIDE, FSETID, FOWNER, NET_RAW, SETGID, SETUID, SETPCAP, NET_BIND_SERVICE, SYS_CHROOT, KILL)
--default-mounts="": add one or more default mount paths in the form host:container (deprecated - add the default mounts to /etc/containers/mounts.conf instead)
--default-runtime="": default OCI runtime from the runtimes config (default: "runc")
--default-sysctls="": sysctls to add to the containers
--default-ulimits="": ulimits to apply to containers by default (name=soft:hard)
--default-transport="": A prefix to prepend to image names that cannot be pulled as-is
--enable-metrics: Enable metrics endpoint. Default is localhost:9090
--file-locking: enable or disable file-based locking
--gid-mappings: Specify the GID mappings to use for user namespace
--help, -h: Print usage statement
--hooks-dir=["path", ...]
Each *.json file in the path configures a hook for CRI-O containers. For more details on the syntax of the JSON files and the semantics of hook injection, see oci-hooks(5). CRI-O currently support both the 1.0.0 and 0.1.0 hook schemas, although the 0.1.0 schema is deprecated.
This option may be set multiple times; paths from later options have higher precedence (oci-hooks(5) discusses directory precedence).
For the annotation conditions, CRI-O uses the Kubernetes annotations, which are a subset of the annotations passed to the OCI runtime. For example, io.kubernetes.cri-o.Volumes is part of the OCI runtime configuration annotations, but it is not part of the Kubernetes annotations being matched for hooks.
For the bind-mount conditions, only mounts explicitly requested by Kubernetes configuration are considered. Bind mounts that CRI-O inserts by default (e.g. /dev/shm) are not considered.
If hooks_dir is unset, CRI-O will currently default to /usr/share/containers/oci/hooks.d and /etc/containers/oci/hooks.d in order of increasing precedence. Using these defaults is deprecated, and callers should migrate to explicitly setting hooks_dir.
--insecure-registry=: Enable insecure registry communication, i.e., enable un-encrypted and/or untrusted communication.
- List of insecure registries can contain an element with CIDR notation to specify a whole subnet.
- Insecure registries accept HTTP or accept HTTPS with certificates from unknown CAs.
- Enabling
--insecure-registryis useful when running a local registry. However, because its use creates security vulnerabilities, it should ONLY be enabled for testing purposes. For increased security, users should add their CA to their system's list of trusted CAs instead of using--insecure-registry.
--image-volumes="": Image volume handling ('mkdir', 'bind' or 'ignore') (default: "mkdir")
- mkdir: A directory is created inside the container root filesystem for the volumes.
- bind: A directory is created inside container state directory and bind mounted into the container for the volumes.
- ignore: All volumes are just ignored and no action is taken.
--listen="": Path to CRI-O socket (default: "/var/run/crio/crio.sock")
--log="": Set the log file path where internal debug information is written
--log-format="": Set the format used by logs ('text' (default), or 'json') (default: "text")
--log-level="": log crio messages above specified level: debug, info, warn, error (default), fatal or panic
--log-dir="": default log directory where all logs will go unless directly specified by the kubelet
--log-size-max="": Maximum log size in bytes for a container (default: -1 (no limit)). If it is positive, it must be >= 8192 (to match/exceed conmon read buffer).
--log-journald: log to systemd journal in addition to the kubernetes log specified with --log
--metrics-port="": Port for the metrics endpoint (default: 9090)
--pause-command="": Path to the pause executable in the pause image (default: "/pause")
--pause-image="": Image which contains the pause executable (default: "k8s.gcr.io/pause:3.1")
--pause-image-auth-file="": Path to a config file containing credentials for --pause-image (default: "")
--pids-limit="": Maximum number of processes allowed in a container (default: 1024)
--profile="": enable pprof remote profiler on localhost:6060
--profile-port="": port for the pprof profiler (default: 6060)
--read-only=true|false: Run all containers in read-only mode (default: false). Automatically mount tmpfs on /run, /tmp and /var/tmp.
--root="": The crio root dir (default: "/var/lib/containers/storage")
--registry="": Registry host which will be prepended to unqualified images, can be specified multiple times
--runroot="": The crio state dir (default: "/var/run/containers/storage")
--runtime="": OCI runtime path (default: "/usr/bin/runc")
--selinux=true|false: Enable selinux support (default: false)
--seccomp-profile="": Path to the seccomp json profile to be used as the runtime's default (default: "/etc/crio/seccomp.json")
--signature-policy="": Path to the signature policy json file (default: "", to use the system-wide default)
--storage-driver: OCI storage driver (default: "overlay")
--storage-opt: OCI storage driver option (no default)
--stream-address="": bind address for streaming socket
--stream-port="": bind port for streaming socket (default: "0")
--uid-mappings="": Specify the UID mappings to use for user namespace
--version, -v: Print the version
CRI-O's default command is to start the daemon. However, it currently offers a single additional subcommand.
Outputs a commented version of the configuration file that would've been used by CRI-O. This allows you to save you current configuration setup and then load it later with --config. Global options will modify the output.
--default Output the default configuration (without taking into account any configuration options).
crio.conf (/etc/crio/crio.conf)
cri-o configuration file for all of the available command-line options for the crio(8) program, but in a TOML format that can be more easily modified and versioned.
policy.json (/etc/containers/policy.json)
Signature verification policy files are used to specify policy, e.g. trusted keys, applicable when deciding whether to accept an image, or individual signatures of that image, as valid.
registries.conf (/etc/containers/registries.conf)
Registry configuration file specifies registries which are consulted when completing image names that do not include a registry or domain portion.
storage.conf (/etc/containers/storage.conf)
Storage configuration file specifies all of the available container storage options for tools using shared container storage.
crio.conf(5), oci-hooks(5), policy.json(5), registries.conf(5), storage.conf(5)
Sept 2016, Originally compiled by Dan Walsh [email protected] and Aleksa Sarai [email protected]