You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I'm using the Figma version but the hardware should be the same, when chekcing in discord. Originally found on my own keymap but also tested default keymap and it behaves the same (though the flickering is a little faster than my own keymap).
When the host goes to sleep, if the keyboard is on default layer, then everything is fine. However as long as it's not on the default layer 0, once the host goes to sleep, the layer indicator LED at the botoom right start flickering.
I removed unrelated keyboards so there are uncommitted changes from qmk doctor output.
Keyboard Used
work_louder/micro
Link to product page (if applicable)
No response
Operating System
Windows 10/11
qmk doctor Output
Ψ QMK Doctor is checking your environment.
Ψ CLI version: 1.1.5
Ψ QMK home: C:/Users/Shigure/qmk_firmware
Ψ Detected Windows 10 (10.0.19045).
Ψ QMK MSYS version: 1.9.0
Ψ Userspace enabled: False
Ψ Git branch: master
Ψ Repo version: 0.26.0
⚠ Git has unstashed/uncommitted changes.
Ψ - Latest master: 2024-09-02 09:13:28 +1000 (28b6a8841f) -- Add `60_ansi_tsangan_split_bs_rshift` to community layouts (#24186)
Ψ - Latest upstream/master: 2024-10-18 09:04:29 +0100 (7f22cb52e3) -- Correct layouts/default/readme.md (#23805)
Ψ - Latest upstream/develop: 2024-09-02 03:48:17 +0100 (3bd303f204) -- Remove `arm_atsam` platform (#24337)
Ψ - Common ancestor with upstream/master: 2024-09-02 09:13:28 +1000 (28b6a8841f) -- Add `60_ansi_tsangan_split_bs_rshift` to community layouts (#24186)
Ψ - Common ancestor with upstream/develop: 2024-09-02 09:13:28 +1000 (28b6a8841f) -- Add `60_ansi_tsangan_split_bs_rshift` to community layouts (#24186)
Ψ All dependencies are installed.
Ψ Found arm-none-eabi-gcc version 12.2.0
Ψ Found avr-gcc version 12.2.0
Ψ Found avrdude version 7.0
Ψ Found dfu-programmer version 1.1.0
Ψ Found dfu-util version 0.11
Ψ Submodules are up to date.
Ψ Submodule status:
Ψ - lib/chibios: 2024-02-17 19:20:06 +0000 -- (be44b3305f)
Ψ - lib/chibios-contrib: 2024-04-03 20:39:24 +0800 -- (77cb0a4f)
Ψ - lib/googletest: 2021-06-11 06:37:43 -0700 -- (e2239ee6)
Ψ - lib/lufa: 2022-08-26 12:09:55 +1000 -- (549b97320)
Ψ - lib/vusb: 2022-06-13 09:18:17 +1000 -- (819dbc1)
Ψ - lib/printf: 2022-06-29 23:59:58 +0300 -- (c2e3b4e)
Ψ - lib/pico-sdk: 2023-02-12 20:19:37 +0100 -- (a3398d8)
Ψ - lib/lvgl: 2022-04-11 04:44:53 -0600 -- (e19410f8)
Ψ QMK is ready to go, but minor problems were found
Is AutoHotKey / Karabiner installed
AutoHotKey (Windows)
Karabiner (macOS)
Other keyboard-related software installed
No response
Additional Context
No response
The text was updated successfully, but these errors were encountered:
Describe the Bug
I'm using the Figma version but the hardware should be the same, when chekcing in discord. Originally found on my own keymap but also tested default keymap and it behaves the same (though the flickering is a little faster than my own keymap).
When the host goes to sleep, if the keyboard is on default layer, then everything is fine. However as long as it's not on the default layer 0, once the host goes to sleep, the layer indicator LED at the botoom right start flickering.
I removed unrelated keyboards so there are uncommitted changes from
qmk doctor
output.Keyboard Used
work_louder/micro
Link to product page (if applicable)
No response
Operating System
Windows 10/11
qmk doctor Output
Is AutoHotKey / Karabiner installed
Other keyboard-related software installed
No response
Additional Context
No response
The text was updated successfully, but these errors were encountered: