DROP starts randomly on my Kaleido M10 dual

[CaliBP]

While I was roasting, the DROP happened without touching my laptop. It happened 16 seconds after the first crack, at 384 F. I was able to turn the burner on manually so I do not loose the beans.

On the same roasting day the DROP triggers by itself 3 times, and 4 times the roast went as planned.

I use a background designed curve and PID.

Could you please help me with this issue ?

[poundy]

Attach your settings. You'll need to save a copy, rename them to end with .txt, and then attach into a reply here (you can't use a reply in email to do this).
There's an auto-drop feature that requires temperature measurements and detection of a decrease in temps. Do you have that turned on (I suspect so).

[CaliBP]

I have saved and renamed to .txt , but the system does not allowed me to add the file

[Terracotta-6]

Attach your *.alog . After automatic DROP SV does not rely on the background straight line to pull up？

[CaliBP]

I do not use auto-drop feature. I designed a profile curve that ends on 403 F, but I never drop at that temperature. That way I have flexibility to end the roast at the temperature I want to have the flavor I look to obtain

[poundy]

you say that, but settings show different
[events]
autoDrop=true

[CaliBP]

I dont know why SV does not keep the curve path. But as it happens after the drop, it does not affect the toast.

[beanoccio]

Have you perhaps turned on an alarm?

[CaliBP]

No, I do not have alarms.

[roasterdave]

I have saved and renamed to .txt , but the system does not allowed me to add the file

Seeing your settings will greatly help to solve this. Help>> Save Settings then rename the file to artisan-settings.aset.txt then drag the file onto a reply box on this Github Discussion page. Do not send in an email reply.

[CaliBP]

artisan-settings.aset.txt

These are my M10 settings

[Terracotta-6]

I don't have this version of hardware, you can try this setup.